- 3D Printed Toys
- 3D Printer Filaments
- 3D Printer Parts
- 3D Printer Coupling
- 3D Printer Display and Controller
- 3D Printer Extruder Kit
- 3D Printer Extruder Parts and Fans
- 3D Printer Heatbed and Accessories
- 3D Printer Nozzle
- 3D Printing Pen
- Aluminum Extrusion and Accessories
- 3D Printers
- 3D Printing Service
- eSun Resins
- Castable Resin for Jewelry
- Dental Resin
- e-Resin ABS PRO
- eResin-eLastic
- eResin-PLA
- eResin-PLA PRO
- Hard Tough Resin
- High Temp Resin
- Other Resins
- Standard Resin
- Water Washable Resin
- Laser Engraver and CNC Machines
APM32F103C8T6 microcontroller ARM Cortex-M3 64KB FLASH 20KB 48-LQFP
In stock
Original price was: ₹210.00.₹160.00Current price is: ₹160.00. (Including. of GST 18%)
SKU:
TO-19963
- System Architecture - 32-bit Arm® Cortex®-M3 core - Up to 96MHz working frequency
- Clock and Memories - HSECLK: 4MHz~16MHz externa
- Power supply and low-power mode - 2.0 ~ 3.6 V reset supply voltage - Support programmable Volta
- FPU - Independent FPU module supports floating point operation
- ADCs and Temperature Sensor - 2 12-bit ADCs, 16 input channels are supported - ADC voltage conversion range: 0~VDDA - Double-sample and hold capability supported - 1 on-chip temperature sensor
- I/O - 80/51/37/26 I/Os selectable, depending on models and packages - All I/O pins are mappable to o 16 external interrupt
- Communication Interfaces - 3 USARTs, support ISO7816, LIN and IrDA - 2 I2C, support SMBus/PMBus - 2 SPIs with a maximum transfer speed of 18Mbps - 1 QSPI, support single - and four-wire access to Flash - 1 USB 2.0 FS Device - 1 CAN 2.0B, USBD and CAN can work independently at the same time
- 1 CRC Unit
- 96-bit UID
- Serial wire debug SWD and JTAG interfaces
- Weight : 0.17 g
STM32F103C8T6 – 32bit Arm Cortex-M3 Microcontroller with 72MHz 64kB Flash 48-Pin LQFP
In stock
Original price was: ₹180.00.₹179.00Current price is: ₹179.00. (Including. of GST 18%)
SKU:
TO-56288
- Arm ® 32-bit Cortex ®-M3 CPU core – 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division
- Memories – 64 or 128 Kbytes of Flash memory – 20 Kbytes of SRAM
- Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR, and programmable voltage detector (PVD) – 4 to 16 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration
- Low-power – Sleep, Stop and Standby modes – V BAT supply for RTC and backup registers
- 2x 12-bit, 1 μs A/D converters (up to 16 channels) – Conversion range: 0 to 3.6 V – Dual-sample and hold capability – Temperature sensor
- DMA – 7-channel DMA controller – Peripherals supported: timers, ADC, SPIs, I2 Cs and USARTs
- Up to 80 fast I/O ports
- Debug mode: – Serial wire debug (SWD) and JTAG interfaces
- Up to nine communication interfaces – Up to two I 2 C interfaces (SMBus/PMBus ®) – Up to three USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) – Up to two SPIs (18 Mbit/s) – CAN interface (2.0B Active) – USB 2.0 full-speed interface
- CRC calculation unit, 96-bit unique ID
- Weight : 1.18 g
STM32F103C8T6 BLUE Pill Dev Board
Out of stock
Original price was: ₹185.00.₹118.00Current price is: ₹118.00. (Including. of GST 18%)
SKU:
TO-64489
- Blue Pill Development Board
- Microcontroller: STM32F103C8T6
- MCU Brand: Generic Brand
- Core: Arm Cortex-M3
- Max. Clock Speed: 72MHz
- Package: LQFP 48 pins
- Internal Flash: 64KiB
- SRAM: 20KiB
- Debug mode: SWD.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
-
72MHz work frequency.
-
64K flash memory, 20K SRAM.
-
With a mini USB interface, you can give the board a power supply and USB communication onboard.
- Weight : 6.05 g
-
Size:5.3cm x 2.3cm.