- 3D Printed Toys
- 3D Printer Filaments
- 3D Printer Parts
- 3D Printer Coupling
- 3D Printer Display and Controller
- 3D Printer Extruder Kit
- 3D Printer Extruder Parts and Fans
- 3D Printer Heatbed and Accessories
- 3D Printer Nozzle
- 3D Printing Pen
- Aluminum Extrusion and Accessories
- 3D Printers
- 3D Printing Service
- eSun Resins
- Castable Resin for Jewelry
- Dental Resin
- e-Resin ABS PRO
- eResin-eLastic
- eResin-PLA
- eResin-PLA PRO
- Hard Tough Resin
- High Temp Resin
- Other Resins
- Standard Resin
- Water Washable Resin
- Laser Engraver and CNC Machines
Showing all 2 results
Filter By Price
APM32F103C8T6 microcontroller ARM Cortex-M3 64KB FLASH 20KB 48-LQFP
Rated 0 out of 5
In stock
SKU:
TO-19963
- System Architecture - 32-bit Arm® Cortex®-M3 core - Up to 96MHz working frequency
- Clock and Memories - HSECLK: 4MHz~16MHz externa
- Power supply and low-power mode - 2.0 ~ 3.6 V reset supply voltage - Support programmable Volta
- FPU - Independent FPU module supports floating point operation
- ADCs and Temperature Sensor - 2 12-bit ADCs, 16 input channels are supported - ADC voltage conversion range: 0~VDDA - Double-sample and hold capability supported - 1 on-chip temperature sensor
- I/O - 80/51/37/26 I/Os selectable, depending on models and packages - All I/O pins are mappable to o 16 external interrupt
- Communication Interfaces - 3 USARTs, support ISO7816, LIN and IrDA - 2 I2C, support SMBus/PMBus - 2 SPIs with a maximum transfer speed of 18Mbps - 1 QSPI, support single - and four-wire access to Flash - 1 USB 2.0 FS Device - 1 CAN 2.0B, USBD and CAN can work independently at the same time
- 1 CRC Unit
- 96-bit UID
- Serial wire debug SWD and JTAG interfaces
- Weight : 0.17 g
STM32F103C8T6 BLUE Pill Dev Board
Rated 0 out of 5
Out of stock
SKU:
TO-64489
- Blue Pill Development Board
- Microcontroller: STM32F103C8T6
- MCU Brand: Generic Brand
- Core: Arm Cortex-M3
- Max. Clock Speed: 72MHz
- Package: LQFP 48 pins
- Internal Flash: 64KiB
- SRAM: 20KiB
- Debug mode: SWD.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
-
72MHz work frequency.
-
64K flash memory, 20K SRAM.
-
With a mini USB interface, you can give the board a power supply and USB communication onboard.
- Weight : 6.05 g
-
Size:5.3cm x 2.3cm.