This white hot melt glue stick applies to all types of electronic product assembly, component fixing, filler, etc. It is high-temperature resistant: The softening point Of 914W is at 152˚C, and its heat resistance can reach up to 110˚C. The non-volatile, environmental friendly enables this hot melt adhesive to meet the requirement Of ROHS. It has no solvent problem and doesn’t contain heavy metals. Its curing time is very short. From coating to curing, it takes only a few seconds to two minutes to reach its initial strength.
Please store the adhesive in a well-ventilated place. Avoid direct sunlight exposure. Shelf life: in original packaging 1 year minimum.

Notice:

• Open time is changeable, depending upon the nature of the substrate, application temperature, thickness of adhesive applied, room temperature and closing pressure.
• Do not touch the molten adhesive. In case of burns from hot adhesive, immediately flush the skin with cold water and cover it with a clean dressing, do not remove the adhesive. Have burn treated by a physician.
• All surfaces should be clean and free of loose elements.
• Do not heat the adhesive over 180˚C for a prolonged time to avoid material decomposition and consequent decreased properties.