- 3D Printed Toys
- 3D Printer Filaments
- 3D Printer Parts
- 3D Printer Coupling
- 3D Printer Display and Controller
- 3D Printer Extruder Kit
- 3D Printer Extruder Parts and Fans
- 3D Printer Heatbed and Accessories
- 3D Printer Nozzle
- 3D Printing Pen
- Aluminum Extrusion and Accessories
- 3D Printers
- 3D Printing Service
- eSun Resins
- Castable Resin for Jewelry
- Dental Resin
- e-Resin ABS PRO
- eResin-eLastic
- eResin-PLA
- eResin-PLA PRO
- Hard Tough Resin
- High Temp Resin
- Other Resins
- Standard Resin
- Water Washable Resin
- Laser Engraver and CNC Machines
Active Components Categories
Filter by Active Components Parameters
Filter by Active Components Parameters
Filter By Price
Average rating
Showing 19–36 of 60 results
“HX710B 24bit ADC THT” has been added to your cart. View cart
CH552G 8-bit USB Device Micro-controller
Rated 0 out of 5
In stock
SKU:
TO-97246
CH554G microcontroller 8-bit Enhanced USB
Rated 0 out of 5
In stock
SKU:
TO-61162
- 79% Faster then E8051
- ROM: 16KB
- DataFlash: 128-byte
- RAM: 256-byte
- xRAM: 1KB
- Built-in USB controller
- Support USB type-C master-slave
- Timer:3 sets of MCS51 timers (T0/T1/T2)
- Capture:Timer T2 is extended to support 2-channel signal capture
- PWM: 2 PWM outputs, PWM1 and PWM2, are 2-channel 8-bit PWM outputs
- UART: 2 UARTs, both support higher communication baud rate
- SPI: The SPI controller has built-in FIFO
- ADC: 4-channel 8-bit analog digital converter
- Touch-key: 6-channel capacitance detection
- supports up to 15 touchkeys
- GPIO: Up to 17 GPIO pins
- Interrupt: It supports 14 sets of interrupt signal sources
- Watch-Dog: 8-bit presettable watchdog timer WDOG, support timing interrupt
- Reset: 4 kinds of reset signal sources
- Clock: Built-in 24 MHz clock source
- Power: Built-in 5V to 3.3V low dropout voltage regulator
- Weight : 0.15 g
CJ2310 S10 SOT23 N-CH MOSFET
Rated 0 out of 5
In stock
₹4.48 - ₹5.60 (Including. of GST 18%)
SKU:
TO-53913
- Continuous Drain Current: 3A
- Threshold Voltage: 2V at 250µA
- Drain-Source Voltage (Vdss): 60V
- Operating Temperature: Up to +150℃
- Power Dissipation: 350mW
- Breakdown Voltage of Grid and Source: ±20V
- Polarization: N-channel
- Storage Temperature: From -55 to +150℃
- Lead Quantity: 3 Pins
- Dimensions (L x W/Size): 3.00 x 1.40mm
- Rated Current: 3A
- Rdson (Maximum) for Different IDs and Vgs: 125mΩ
DB107S – 1A Diode Bridge SMD
Rated 0 out of 5
In stock
₹3.54 - ₹3.85 (Including. of GST 18%)
SKU:
TO-16398
DS1307 RTC IC SMD
Rated 0 out of 5
In stock
SKU:
TO-12132
- serial real-time clock (RTC)
- 56-byte, battery-backed, nonvolatile (NV) RAM for data storage
- Two-wire serial interface
- Programmable square wave output signal
- Automatic power-fail detect and switch circuitry
- Consumes less than 500 nA in battery backup mode with oscillator running
- Operating Supply Current: 1.5 mA
- Operating Temperature: – 40 C ~ + 85 C
- Supply Voltage: 5.5 ~ 4.5 V
EL817S1(C)(TU)-F – Optocoupler 1-CH 5000Vrms 4-Pin SMD
Rated 0 out of 5
Out of stock
₹7.35 - ₹7.82 (Including. of GST 18%)
SKU:
TO-65897
- Part Number: EL817S1 (C) (TU) – F
- Number of Channels: 1 Channel
- Forward current: 60mA
- Reverse voltage: 6V
- Voltage - Isolation:5000Vrms
- Break Down Voltage: 150mW
- Collector current: 50mA
- Maximum Collector-Emitter Voltage: 80V
- Emitter-Collector voltage: 7V
- Maximum Collector Current: 40mA
- Operating temperature: up to +110°C
- Mounting Type: SMD
HR8833 IC TSSOP 16
Rated 0 out of 5
In stock
SKU:
TO-41582
- Type: Motor Driver
- IC Model: HR8833
- Package: TSSOP16
- Power Supply Voltage Range: 2.7 V – 12.8 V
- Low MOSFET On-Resistance: HS + LS 400 mΩ
- PWM Winding Current Regulation/Limiting
- Dual-H-Bridge Current-Control Motor Driver
- Capable of Driving Two DC Motors or One Stepper Motor
- 1.5-A RMS per H-Bridge
- Outputs Can Be Paralleled for 3-A RMS
HX710B 24bit ADC
Rated 0 out of 5
In stock
SKU:
TO-81994
- Type: Analog-to-digital converter (ADC)
- IC Model: HX710B
- Mounting: SMD
- Operation supply voltage range: 2.6 5.5V
- Operation temperature range: -40 +85°C
- On-chip power-on-reset
- On-chip temperature measurement (HX701A)
- DVDD and AVDD supply voltage difference measurement
- On-chip low noise amplifier with a gain of 128
- Selectable IOSPS or 40SPS output data rate
- Simultaneous 50 and 60Hz supply rejection
- 8-pin SOP-8 package
HX710B 24bit ADC THT
Rated 0 out of 5
In stock
SKU:
TO-87296
- Type: Analog-to-digital converter (ADC)
- IC Model: HX710B
- Mounting: Through hole
- Operation supply voltage range: 2.6 5.5V
- Operation temperature range: -40 +85°C
- On-chip power-on-reset
- On-chip temperature measurement (HX701A)
- DVDD and AVDD supply voltage difference measurement
- On-chip low noise amplifier with a gain of 128
- Selectable IOSPS or 40SPS output data rate
- Simultaneous 50 and 60Hz supply rejection
- 8-pin SOP-8 package
- Weight : 0.47 g
J3Y NPN SOT-23 SMD S8050
Rated 0 out of 5
In stock
₹1.46 - ₹1.55 (Including. of GST 18%)
SKU:
TO-24171
LM2596HVS-5.0 Step Down Regulator – Fixed Output 5V – TO-263
Rated 0 out of 5
In stock
₹25.57 - ₹27.20 (Including. of GST 18%)
SKU:
TO-56216
LM2596R-5.0 TO263 HTC 5V@3A Fixed 150kHz Step-Down Switching Regulator
Rated 0 out of 5
In stock
₹48.88 - ₹52.00 (Including. of GST 18%)
SKU:
TO-15869
LM2596S-3.3V step Down Switching Regulator IC – T0263-5
Rated 0 out of 5
In stock
₹22.56 - ₹24.00 (Including. of GST 18%)
SKU:
TO-65586
LM317T THT
Rated 0 out of 5
In stock
₹9.17 - ₹9.75 (Including. of GST 18%)
SKU:
TO-41566
- Product Name: LM317T
- Type: Voltage Regulator
- Package Type: Through-Hole (THT)
- Output Voltage: Adjustable from 1.25V to 37V
- Output Current: Up to 1.5A
- Input Voltage Range: Up to 40V
- Weight : 1.89 g
- Features:
- Adjustable output voltage through external resistors.
- Internal current limiting and thermal shutdown protection.
- Wide temperature range operation (-40°C to +125°C).
LM324 Quard OP-AMP
Rated 0 out of 5
In stock
SKU:
TO-76173
- Short Circuited Protected Outputs
- True Differential Input StageSingle Supply Operation: 3.0 V to 32 V
- Low Input Bias Currents: 100 nA Maximum (LM324A)
- Four Amplifiers Per Package
- Internally Compensated
- Common Mode Range Extends to Negative Supply
- Industry Standard Pinouts
- ESD Clamps on the Inputs Increase Ruggedness without Affecting Device Operation
- NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
- These Devices are Pb−Free, Halogen Free/BFR Free and RoHS-compliant
- Weight : 0.14 g
LM393 amp
Rated 0 out of 5
In stock
SKU:
TO-14475
- Type: Op-amp
- Model: LM393
- Monolithic true instrumentation amplifier.
- Fixed gains of 10, 100, and 1000 without external components.
- Precision performance through on-chip trimming.
- Super-beta bipolar input stage for low input bias current and voltage noise.
- High common-mode rejection ratio.
- Two-stage amplifier design with open-loop gain of 10,000,000.
- Operates from -5V to -18V with low current consumption.
- Ideal for low-level transducers.
- Ultra-high common-mode rejection for demanding applications.
- Pin-strappable gains for easy configuration.
- Twin differential shield drivers for bandwidth preservation.
- Compensation pins for noise reduction.
- Separate output force, sense, and reference pins for gain programming.
- Available in 16-pin DIP and 8-pin metal can packages.
- Wide temperature range: 0°C to 70°C.
- Weight : 0.47 g